GRIPVOX 133P

GRIPVOX 133P

Smooth Surface Ceramic Primer

Packaging
1 kg, 5 kg, and 15 kg plastic bucket
Application area
Flat and glossy surfaces such as ceramics, raw concrete, sandstone, marble, clinker, plywood
Consumption
150-300 g/m² (For Single Coat)
  • Ready to use.
  • Can be applied with a brush or roller.
  • Does not contain solvents. 
  • Odorless
  • Harmless to human and environmental health
  • Appearance: Orange liquid

The surfaces to be applied with Gripvox 133P Primer must be clean and dry, free from all types of dirt, oil, and dust.

  • The surface must be free from residues that may prevent adhesion.
  • The surface should be cured and solid.
  • The product should be mixed with a mixer operating at 400-600 rpm for 3-5 minutes until no lumps remain.
  • If the mixture cannot be used shortly after preparation, it should be re-mixed at regular intervals to maintain homogeneous distribution.
  • Gripvox 133P Smooth Surface Primer is applied in a single coat with a roller or brush. The application of plaster can be done 6 hours after the primer application.
  • During application, the surface and ambient temperature should be between +5°C and +30°C.
  • After the application of Gripvox 133P Smooth Surface Primer, plaster or joint application should be done within 7 days at the latest.
  • Used as a primer on flat and glossy surfaces such as ceramics, raw concrete, sandstone, marble, clinker, plywood, as well as absorbent surfaces like plaster, concrete, mortar, screed, and wood.
  • Not suitable for surfaces exposed to continuous water.
  • Ready to use.
  • If necessary, it can be diluted with water up to 10%.

Avoid application below +5°C and above +35°C.

  • It is recommended to use rubber gloves during product application.
  • The product should not be inhaled directly. Dust mask should be used if necessary.
  • Products should be stored out of reach of children.
  • Consult a doctor if necessary.
  • R38 Irritates skin.
  • R41 Risk of serious eye damage. Contains Chromium VI. Allergic reactions may occur.
  • R43 May cause sensitization by skin contact.
  • Keep out of reach of children.
  • S22 Do not breathe dust.
  • S24/25 Avoid contact with eyes and skin.
  • S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
  • S37/39 In case of ingestion, seek medical advice immediately, showing the product container and label.

Technical Data Sheets (TDS)

PDF TDS