AQUAVOX 403X
Two-Component Fully Flexible Waterproofing Mortar for Bathrooms, Terraces, Balconies, and Water Tanks
- Packaging
- 25 kg kraft bag + 10 Litre Can
- Application area
- Terraces, Balconies, and Water Tanks
- Consumption
- 1.7 kg/m²
Key Features
- Two-Component Structure: Composed of acrylic dispersion (liquid) and cement-based (powder) components.
- Flexibility & Durability: Its fully elastic structure prevents cracking; resistant to freeze-thaw cycles, seawater, and salts.
- Safe: Suitable for use in drinking water storage.
No content has been added for this section yet.
Areas of Use
- Indoor and Outdoor Areas: Wet areas such as balconies, terraces (provided they are protected), bathrooms, and toilets.
- Water Structures: Water tanks, swimming/decorative pools, baths, and spas.
- Infrastructure and Foundations: Applied from the side where water comes (positive waterproofing) in structures such as foundation insulation, retaining walls, tunnels, subways, dams, and highways.
Application and Mixing Instructions
- Mixing Ratio: Slowly add 22.67 kg of Component A (powder) into 10 Litres of Component B (liquid). Mix with a low-speed mixer for 2-3 minutes until homogeneous.
- Surface Preparation: The surface must be clean, moist, and solid. Deep imperfections should be repaired with repair mortar at least 24 hours before application. Porous surfaces should be pre-wetted and kept moist without pooling.
- Usage Life: The prepared mortar should be consumed within 2 hours.
Critical Warnings:
- No additional water or foreign substances should be added to the mortar. The mixture should only be made with its own liquid.
- In areas at risk of mechanical impact, it should be protected with ceramic or similar coverings.
- Equipment used should be cleaned with water after application before it hardens.
- Avoid application below +5°C and above +35°C.
- Only its own liquid should be used for the mixture.
- After application, protect from direct sunlight, strong winds, high temperatures (above +35°C), rain, and frost.
- Do not add powder or liquid to mortar that has exceeded its usage period.
- Do not apply to wooden, particle board, MDF, plywood, PVC, and metal surfaces.
It is recommended to use latex gloves during product application.
- The product should not be inhaled directly. A dust mask should be used if necessary.
- Products should be stored out of reach of children.
- Consult doctors if necessary.
- R38 Irritates skin.
- R41 Risk of serious eye damage Contains Chromium VI. Allergic reactions may occur.
- R43 May cause sensitization by skin contact.
- Keep out of reach of children.
- S22 Do not breathe dust.
- S24/25 Avoid contact with eyes and skin.
- S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- S37/39 In case of ingestion, seek medical advice immediately.